Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0107
- DTCs P0101, P0641, P0651, P1101, P1516, P2101, P2125, P2135, P2138, P2176 are not set.
- The engine speed is greater than 400 RPM.
- The throttle angle is greater than 0 % when the engine speed is less than 800 RPM.
OR
The throttle angle is greater than 13 % when the engine speed is greater than 800 RPM.
- This DTC runs continuously when the above conditions are met.
P0108
- DTCs P0101, P1101, P1516, P2101, P2125, P2135, P2138, P2176 are not set.
- The engine has been running for a period of time that is determined by the start-up engine coolant temperature (ECT). The time ranges from 8 s at less than -30°C (-22°F) to 3 s at greater than 30°C (86°F).
- The throttle angle is less than 1 % when the engine speed is less than 1,200 RPM.
OR
- The throttle angle is less than 20 % when the engine speed is greater than 1,200 RPM.
- This DTC runs continuously when the above conditions are met.