Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The BARO sensor has a 5-volt reference circuit, a low reference circuit, and a signal circuit. The control module supplies 5 volts to the BARO sensor on a 5-volt reference circuit, and provides a ground on a low reference circuit. The BARO sensor provides a voltage signal to the control module on a signal circuit relative to the ambient pressure changes.

The manifold absolute pressure (MAP) sensor has a 5-volt reference circuit, a low reference circuit, and a signal circuit. The control module supplies 5 volts to the MAP sensor on a 5-volt reference circuit, and provides a ground on a low reference circuit. The MAP sensor provides a voltage signal to the control module on a signal circuit relative to the intake manifold pressure changes. The control module compares the BARO sensor to the MAP sensor in order to monitor the BARO sensor operation.