LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Transfer Case - Mp 3023/3024-NQH) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Transfer Case Rear Case Half Removal

Transfer Case Rear Case Half Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: View Of Transfer Case Halves, Bracket & Bolts
GM1849346Courtesy of GENERAL MOTORS COMPANY
Transfer Case Rear Case Half Removal

Callout Component Name
1 Transfer Case Bolts (Qty: 17)
2 Transfer Case Bracket
3 Transfer Case Rear Case Half
CAUTION:

Refer to Machined Surface Damage Caution .

NOTE:
  • Use opposing pry bars at casting bosses to spread the case.
  • Use snap ring pliers to release the transfer case rear output shaft outer retaining ring from the transfer case rear output shaft rear bearing assembly.
scientia non olet · About LEMON Manuals