Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
C0396 01
Voltage on incremental encoder sensor 8 V supply circuit greater than 9.0 V.
C0396 02
Incremental encoder sensor 8 V supply circuit less than 1.5 V; or, voltage on incremental encoder impulse signal circuit or incremental encoder direction signal circuit less than 0.5 V.
C0396 04
Voltage on encoder 8 V supply circuit is 1.5-9.0 V and voltage read by low reference circuit less than 0.3 V.
C0396 05
Voltage on encoder signal circuits less than 0.3 V or greater than 4.6 V.