LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> DTC B0790 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The Neutral indicator circuit consists of a light emitting diode (LED) feed circuit, a LED and a LED control circuit. The Ignition 1 voltage circuit is the LED feed circuit and continuously supplies B+ to the Neutral LED. When the Neutral mode has been selected by the driver, the transfer case shift control module (TCCM) provides a ground through the Neutral indicator control circuit illuminating the LED.

The TCCM tests the Neutral indicator circuit for unexpected voltage by monitoring the B+ supplied by the BCM on the Ignition 1 voltage circuit by grounding the Neutral indicator control circuit for 2 seconds during the Bulb Test at key ON.

scientia non olet · About LEMON Manuals