LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls/Fuel - Hybrid (LZ1) - Repair Instructions) >> Repair Instructions >> Evaporative Emission System Hose/Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of EVAP Pipe & Clips
    GM1965576Courtesy of GENERAL MOTORS COMPANY
  1. Install the EVAP pipe (3) to the vehicle.
  2. Connect the EVAP pipe quick connect fitting to the EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Connect the EVAP pipe quick connect fitting to the auxiliary EVAP canister. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the EVAP pipe clip (1) to the rear brake front pipes.
  5. Install the EVAP pipe clip (2) to the frame crossmember.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals