Input Shaft Oil Seal Removal

WARNING: This page is about a different car, the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Tahoe, 2013 Chevrolet Suburban, and 2013 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Illustrating Proper Input Shaft Oil Seal Installation

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Input Shaft Oil Seal CAUTION: Refer to Machined Surface Damage Caution . Procedure Drill a pilot hole, as required, and insert a self-tapping screw into the body of the seal. Use a plier or slide hammer type tool to remove the seal from the bore.