LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Transfer Case - Mp 3010-NP0) >> Repair Instructions - Off Vehicle >> Transfer Case Assemble >> Actuator Shaft and Cam Assembly, and Rear Output Shaft Assembly Installation

Actuator Shaft and Cam Assembly, and Rear Output Shaft Assembly Installation

WARNING: This page is about a different car, the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Tahoe, 2013 Chevrolet Suburban, and 2013 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Actuator Shaft and Cam Assembly, and Rear Output Shaft Assembly
GM2236733Courtesy of GENERAL MOTORS COMPANY
Actuator Shaft and Cam Assembly, and Rear Output Shaft Assembly Installation

Callout Component Name
Preliminary Procedure 
Load all 3 components simultaneously.
1 Transfer Case Actuator Shaft and Cam Assembly
2 Transfer Case Rear Output Shaft Assembly