LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Transfer Case - Mp 3010-NP0) >> Diagnostic Information and Procedures >> Transfer Case Shift Control Switch Inoperative >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Tahoe, 2013 Chevrolet Suburban, and 2013 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Review the scan tool data list mode switch selected and select difference mode with the transfer case shift control switch. Does the mode switch selected parameter on the scan tool change as you change modes on the switch?
  2. If the modes change according to the scan tool replace the transfer case control module, reprogram, complete the motor learn procedure. If the modes on the scan tool not change replace the switch.
scientia non olet · About LEMON Manuals