LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Transfer Case - Mp 3010-NP0) >> Diagnostic Information and Procedures >> Transfer Case Grating Noise

Transfer Case Grating Noise

WARNING: This page is about a different car, the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Tahoe, 2013 Chevrolet Suburban, and 2013 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Transfer Case Grating Noise

Cause Correction
DEFINITION: A faulty internal transfer case component that causes a grating noise in the transfer case while in the AWD or 4HI mode.
Review the Symptoms - Transfer Case  and perform the necessary inspections.
Broken clutch apply plate
  1. Inspect for a broken clutch apply plate. Refer to Transfer Case Disassemble , and Transfer Case Assemble .
  2. Replace the apply plate and the transfer case components that are damaged from debris. Refer to Transfer Case Disassemble , and Transfer Case Assemble .
Faulty control actuator lever thrust bearings
  1. Inspect for faulty control actuator lever thrust bearings. Refer to Two/Four Wheel Drive Shift Components Cleaning and Inspection .
  2. Recondition the transfer case components that are damaged from debris. Refer to Transfer Case Disassemble , and Transfer Case Assemble .