LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Transfer Case - Mp 3010-NP0) >> Diagnostic Information and Procedures >> DTC C0398 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Tahoe, 2013 Chevrolet Suburban, and 2013 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Key ON, engine OFF.
  2. Connect a scan tool.
  3. Monitor the IPS and RPS parameters on the scan tool. Using the transfer case shift control switch, shift the transfer case into all modes. The IPS and RPS parameters should track each other.