LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Transfer Case - Mp 3010-NP0) >> Diagnostic Information and Procedures >> DTC C0396 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Tahoe, 2013 Chevrolet Suburban, and 2013 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

C0396 01 

Voltage on incremental encoder sensor 8 V supply circuit greater than 9.0 V.

C0396 02 

Incremental encoder sensor 8 V supply circuit less than 1.5 V, or voltage on incremental encoder impulse signal circuit or incremental encoder direction signal circuit less than 0.5 V.

C0396 04 

Voltage on encoder 8 V supply circuit is 1.5-9.0 V and voltage read by low reference circuit less than 0.3 V.

C0396 05 

Voltage on encoder signal circuits less than 0.3 V or greater than 4.6 V.