Instrument Cluster Replacement (Except Cadillac)
Instrument Cluster Replacement (Except Cadillac)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the instrument panel cluster trim plate . Refer to Instrument Cluster Trim Panel Replacement (Cadillac) .
NOTE:
Before removing the instrument cluster, use SPS programming support tool to capture the odometer information. This captured data will then need to be programmed into the NEW instrument cluster. Refer to Instrument Cluster Programming and Setup . |
|
| 1 | Instrument Panel Cluster Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 2 (18 lb in) |
| 2 | Instrument Panel Cluster Assembly Procedure A replacement cluster must be programmed. Refer to Control Module References . |