LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Head Restraint Replacement (With AYE)

Driver or Passenger Seat Head Restraint Replacement (With AYE)

Fig 1: Identifying Front Seat Head Restraint (With AYE)
GM2037467Courtesy of GENERAL MOTORS COMPANY
Driver or Passenger Seat Head Restraint Replacement (With AYE)

Callout Component Name
Preliminary Procedures 
Remove Front Seat Back Cushion Finish Panel. Refer to Front Seat Back Cushion Finish Panel Replacement (without HP2) , Front Seat Back Cushion Finish Panel Replacement (with HP2) 
1 Front Seat Head Restraint

Procedure

  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert small tool into opposite head restraint retainer to release.
  3. Tie a wire or string to the end of the DVD cable in order to aid in the installation of the new Front Seat Head Restraint .
  4. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals