LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Knee Bolster Replacement (Except Cadillac)

Knee Bolster Replacement (Except Cadillac)

Fig 1: View Of Knee Bolster Assembly & Components (Except Cadillac)
GM1682666Courtesy of GENERAL MOTORS COMPANY
Knee Bolster Replacement (Except Cadillac)

Callout Component Name

Preliminary Procedures

  1. Remove the left instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement (Except Cadillac) , Instrument Panel Outer Trim Cover Replacement (Cadillac) .
  2. Remove the park brake release handle. Refer to Parking Brake Release Handle Assembly Replacement .
1 Knee Bolster Assembly Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Knee Bolster Assembly

Procedure

  1. Disconnect the electrical connections, if applicable.
  2. If replacing the knee bolster assembly, transfer all necessary components.
3 Retainer Clip (Qty: 4)
scientia non olet · About LEMON Manuals