LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Air Inlet Grille Panel Replacement

Air Inlet Grille Panel Replacement

Fig 1: View Of Air Inlet Panel & Components
GM1673096Courtesy of GENERAL MOTORS COMPANY
Air Inlet Grille Panel Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the fixed antenna, if equipped. Refer to Radio Antenna Replacement .
  2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (Chevrolet Hybrid Two-mode) , Windshield Wiper Arm Replacement (Conventional) .
  3. Remove the rear hood seal. Refer to Hood Rear Seal Replacement .
1 Air Inlet Panel End Panel
2 Air Inlet Panel Retainer (Qty: 2)
3 Air Inlet Panel Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
4 Air Inlet Panel Clip
5 Air Inlet Panel