LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Repair Instructions >> Headlamp Control Module Replacement (Escalade PLATINUM)

Headlamp Control Module Replacement (Escalade PLATINUM)

Fig 1: Headlamp Control Module (Escalade PLATINUM)
GM2039271Courtesy of GENERAL MOTORS COMPANY
Headlamp Control Module Replacement (Escalade PLATINUM)

Callout Component Name
Preliminary Procedure 
Remove the headlamp assembly. Refer to Headlamp Replacement (Cadillac Escalade) , Headlamp Replacement (Tahoe, Avalanche) , Headlamp Replacement (Chevrolet Tahoe Two-mode Hybrid) , Headlamp Replacement (Escalade PLATINUM) , Headlamp Replacement (Non HID) , Headlamp Replacement (Yukon) , Headlamp Replacement (GMC Yukon Two-mode Hybrid) .
1 ELC Module Screw (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
Hand tighten the screws evenly after installation of the ELC module to the headlamp connector.
2 ELC Module
TIP:  Pull the module straight from the headlamp connector.