Radio Replacement (Except Cadillac)

Fig 1: View Of Radio Assembly & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
NOTE: Use a scan tool to retrieve the radio part number before removing the radio from the vehicle. Preliminary Procedures Remove the accessory switch assembly. Refer to Accessory Switch Replacement (Cadillac) , Accessory Switch Replacement (Except Cadillac) . Remove the HVAC control module. Refer to HVAC Control Module Replacement (Except Cadillac) , or HVAC Control Module Replacement (Cadillac) .
1	Radio Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Radio Assembly Disconnect the electrical connector. Disconnect the antenna cable. Reprogram the radio after replacement. Refer to Control Module References .

Callout

Component Name

NOTE:

Use a scan tool to retrieve the radio part number before removing the radio from the vehicle.

Preliminary Procedures

Radio Screw (Qty: 4)

CAUTION:

Tighten
2 N.m (18 lb in)

Radio Assembly