Q49 Rear Differential Clutch Solenoid Valve (F46)
 Courtesy of
|
Connector Part Information
- Harness Type: Rear Differential
- OEM Connector: 10833916
- Service Connector: Service by Harness - See Part Catalog
- Description: 2-Way F 2.8 Series, Sealed (BK)
|
Terminal Part Information
- Terminated Lead: Service by Harness- See Part Catalog
- Release Tool: Not Available
- Diagnostic Test Probe: Not Available
- Terminal/Tray: Service by Harness- See Part Catalog
- Core/Insulation Crimp: Not Available
|
Q49 Rear Differential Clutch Solenoid Valve (F46)
| Pin |
Wire |
Circuit |
Function |
| 1 |
0.75 RD* |
934 |
Differential Lock Actuator High Control |
| 2 |
0.75 BK* |
935 |
Differential Lock Actuator Low Control |
| * Wire Colors May Vary - The wire colors in these cavities are known to have been changed during production by the wiring harness supplier. Not all possible wire color combinations are known at this time. The following lists some of the colors known to have been used in these cavities: RD wires in both cavities, BK wires in both cavities, and BK in cavity 1, RD in cavity 2. |