K28 Headlamp Leveling Control Module X2 (TT6, TT7, or TT8)

Courtesy of

Connector Part Information Harness Type: Body OEM Connector: 13548562 Service Connector: 89047360 Description: 18-Way F 0.64 Kaizen Series (BK)

Terminal Part Information Pins: 2-6, 8-9, 11, 13-15, 18 Terminated Lead: 13575867 Release Tool: J-38125-215A Diagnostic Test Probe: J-35616-64B (L-BU) Terminal/Tray: SAIT-A03T-M064/14 Core/Insulation Crimp: P/P Pin: 16 Terminated Lead: 13575742 Release Tool: J-38125-215A Diagnostic Test Probe: J-35616-64B (L-BU) Terminal/Tray: SAIT-A02T-M064/20 Core/Insulation Crimp: P/P

K28 Headlamp Leveling Control Module X2 (TT6, TT7, or TT8)

Pin	Wire	Circuit	Function
1	-	-	Not Used
2	0.5 BN	2184	Automatic Level Control Position Sensor Signal
3	0.5 GY/WH	7524	5-Volt Reference
4	0.5 BN/WH	7525	Headlamp Leveling Sensor - Front Signal
5	0.5 PU/WH	7526	Low Reference
6	0.35 L-BU	5986	Serial Data Communication Enable
7	-	-	Not Used
8	0.5 PK/WH	3208	Headlamp Power
9	0.5 PK/BK	3207	Headlamp Power
10	-	-	Not Used
11	0.5 PU	2185	Automatic Level Control Position Sensor Low Reference
12	-	-	Not Used
13	0.5 GY	2165	5-Volt Reference
14	0.5 GY	3206	Ground
15	0.5 GY/BK	3205	Ground
16	0.8 BK	750	Ground
17	-	-	Not Used
18	0.5 RD/WH	1140	Battery Positive Voltage