Parking Brake Cable Guide Replacement

Parking Brake Cable Guide Replacement

Removal Procedure

1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




3. Remove the park brake cable guide bolt from the frame.
4. Remove the park brake cable guide.
5. Remove the park brake cable guide from the park brake cable.

Installation Procedure

1. Install the park brake cable guide to the park brake cable.
2. Install the park brake cable guide.





Caution: Refer to Fastener Caution Fastener Caution.

3. Install the park brake cable guide bolt to the frame and tighten to 12 Nm (106 lb in).
4. Lower the vehicle.