Steering Column Shroud Replacement (With Electronic Tilt Steering)

Fig 1: Steering Column Shroud Replacement (With Electronic Tilt Steering)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Lower Steering Column Shroud Bolt CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Lower Steering Column Shroud Procedure Disconnect any electrical connectors as needed. Disconnect the shift lever seal from the steering column lower trim cover.
3	Upper Steering Column Shroud Bolt Tighten 2 N.m (18 lb in)
4	Upper Steering Column Shroud Procedure Disconnect the shift lever seal from the steering column upper trim cover.