LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2012 >> Escalade ESV RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case - BW 4485 (Nr3)) >> Repair Instructions - On Vehicle >> Transfer Case Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Transfer Case Shield & Bolts
    GM1696787Courtesy of GENERAL MOTORS COMPANY
  1. Position the transfer case shield (2 or 5).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transfer case shield bolts (1, 3, and 4) and tighten to 20 (15 lb ft).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals