Clutch Pressure Plate Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Clutch Pressure Plate Installation
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Control Actuator Lever Washer |
| 2 | Transfer Case Four Wheel Drive Clutch Pressure - Apply - Plate |
| 3 | Transfer Case Four Wheel Drive Clutch Pressure Plate Spring (Qty: 4) |
| 4 | Transfer Case Four Wheel Drive Clutch Pressure Plates |
| 5 | Transfer Case Four Wheel Drive Clutch Hub |
| 6 | Transfer Case Four Wheel Drive Clutch Shim |
| 7 | Transfer Case Two/Four Wheel Drive Clutch Retaining Ring
NOTE:
The Transfer Case High/Low Clutch Reset must be performed after the transfer case is installed in the vehicle. |