Camshaft Position (CMP) Sensor- Bank 1 Intake (LH2)
Courtesy of GENERAL MOTORS COMPANY Camshaft Position (CMP) Sensor- Bank 1 Intake (LH2)
| Pin |
Wire |
Circuit |
Function |
| A |
0.5 D-BU |
6259 |
5-Volt Reference |
| B |
0.5 BN |
6266 |
Low Reference |
| C |
0.35 D-BU/WH |
6265 |
Camshaft Position (CMP) Sensor- Intake Bank 1 Signal |
Connector Part Information
- Harness Type: Engine
- OEM Connector: 15326808
- Service Connector: 15306388
- Description: 3-Way F GT 150 Series, Sealed (BK)
|
Terminal Part Information
- Terminated Lead: 13575396
- Release Tool: J-38125-553
- Diagnostic Test Probe: J-35616-2A (GY)
- Terminal/Tray: 15326427/5
- Core/Insulation Crimp: E/A
|