LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Instrument Cluster Gauges Inoperative >> Circuit/System Verification

Circuit/System Verification

IMPORTANT:

If the suspect gauge is the speedometer, the drive wheels of the vehicle must be raised and the transmission must be placed in drive or first gear. Refer to Lifting and Jacking the Vehicle .

  1. Ignition ON and the scan tool installed, perform the IPC Gauge Sweep Test in the IPC Output Controls. Verify that all gauge dials move from the minimum to the maximum value and back to the gauge minimum value.
    • If the gauges do not perform the IPC Gauge Sweep Test, replace the IPC.
  2. With the drive wheels raised start the engine and place the vehicle transmission in drive or the first gear. Verify that the speedometer value matches the scan tool Vehicle Speed parameter in the ECM Engine Data List.
    • If the speedometer is incorrect, test or replace the IPC.
scientia non olet · About LEMON Manuals