Removal Procedure

WARNING: This page is about a different car, the 2011 GMC Cab & Chassis Sierra, 2011 Chevrolet Suburban, and 2011 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to Brake Dust Warning .

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: Rear Wheel Speed Sensor Electrical Connector And Harness Clips

Courtesy of GENERAL MOTORS CORP.

Disconnect the wheel speed sensor electrical connector (1).
Release the wheel speed sensor electrical connector and sensor harness clips (2) from the inboard frame rail.

Fig 2: Rear Wheel Speed Sensor Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor bolt (1).

Fig 3: Rear Wheel Speed Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the wheel speed sensor (1) from the rear axle.