LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW >> Diagnostic Information and Procedures >> StabiliTrak Indicator Malfunction >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the multifunction switch assembly-I/P.
  2. Test for infinite resistance between the signal terminal 1 and the ground terminal 3 with the switch in the open position.
    • If less than infinite resistance 

      Replace the multifunction switch assembly-I/P

    • If infinite resistance 
  3. Test for less than 2 Ω between the signal terminal 1 and the ground terminal 3 with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the multifunction switch assembly-I/P

    • If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals