LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW >> Diagnostic Information and Procedures >> StabiliTrak Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool BCM Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing below.

    • If the parameter changes 
  3. Verify the traction/stability control indicator turns ON and OFF when commanding the Instrument Panel Cluster, Lamp Test ON and OFF with a scan tool.
    • If the indicator does not turn ON and OFF 

      Replace the IPC.

    • If the indicator turns ON and OFF 
  4. All OK.
scientia non olet · About LEMON Manuals