LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1881 (Wiring Systems And Power Management - Component Connector End Views Part 1) >> Camshaft Position (CMP) Sensor (4.8L/5.3L/6.0L/6.2L)

Camshaft Position (CMP) Sensor (4.8L/5.3L/6.0L/6.2L)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor (4.8L/5.3L/6.0L/6.2L) Connector End View
GM516611Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Sensor (4.8L/5.3L/6.0L/6.2L)

Pin Wire Circuit Function
A 0.35 RD 631 5-Volt Reference (4.8L/5.3L)
0.35 D-BU 6259 5-Volt Reference (6.0L/6.2L)
B 0.35 PK/BK 632 Low Reference (4.8L/5.3L)
0.35 BN 6266 Low Reference (6.0L/6.2L)
C 0.35 BN/WH 633 Camshaft CAM W Signal (4.8L/5.3L)
0.35 D-BU/WH 6265 Camshaft CAM W Signal (6.0L/6.2L)
Connector Part Information 
  • OEM: 12059595
  • Service: 88986451
  • Description: 3-Way F Metri-Pack 150 Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12048074/2
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12094429/J-35616-14 (GN)