Front Floor Console Replacement (with RPO SLT)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Floor Console Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the 2 front seats. Refer to Front Seat Replacement - Bucket . Remove the right and left front floor console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (with RPO SLT) and Front Floor Console Side Trim Panel Replacement - Left Side (with RPO SLT) . Remove the front floor console bezel. Refer to Floor Console Bezel Replacement . Disconnect the electrical connectors to the console assembly.
1	Front Floor Console Assembly Tip: With the aid of an assistant, remove the console from the vehicle. When replacing the console assembly, transfer all the necessary components.

Callout

Component Name

Preliminary Procedures

Remove the 2 front seats. Refer to Front Seat Replacement - Bucket .
Remove the right and left front floor console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (with RPO SLT) and Front Floor Console Side Trim Panel Replacement - Left Side (with RPO SLT) .
Remove the front floor console bezel. Refer to Floor Console Bezel Replacement .
Disconnect the electrical connectors to the console assembly.

Front Floor Console Assembly
Tip:

With the aid of an assistant, remove the console from the vehicle.
When replacing the console assembly, transfer all the necessary components.