LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1233 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Transmission Fluid Pan Installation (6L80)

Transmission Fluid Pan Installation (6L80)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Transmission Fluid Pan (& Bolt Tightening Sequence) -- (6L80)
GM1980155Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Fluid Pan Gasket
Tip:  The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.
2 Fluid Pan Assembly
3 Fluid Pan Bolts M6 x 20 (Qty: 18)
NOTE: Refer to Fastener Notice .

Procedure: 
Tighten in sequence shown.

Tighten:  9 N.m (80 lb in)