Torque Converter Installation and Holding Fixture Removal (6L80/6L90)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Converter And Holding Fixture Component View

Courtesy of GENERAL MOTORS CORP.

Callout	Procedure
Preliminary Procedure: Rotate the transmission so that the fluid pan assembly is down.
1	Transmission Case Assembly Special Tools DT 47605 Holding Fixture Adapter. See Special Tools . J 3289-20 Holding Fixture Base Assembly. See Special Tools . J 8763-B Holding Fixture. See Special Tools .
2	Torque Converter Assembly

Callout

Procedure

Preliminary Procedure:
Rotate the transmission so that the fluid pan assembly is down.

Transmission Case Assembly

Special Tools

DT 47605 Holding Fixture Adapter. See Special Tools .
J 3289-20 Holding Fixture Base Assembly. See Special Tools .
J 8763-B Holding Fixture. See Special Tools .

Torque Converter Assembly