LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1233 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Output Shaft Seal Replacement (AWD Models Only)

Output Shaft Seal Replacement (AWD Models Only)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Replacing Output Shaft Seal
GM1555294Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Output Shaft Seal Assembly
NOTE: Refer to Seal Reuse Notice .

Special Tool

  • J 37212  Front Output Shaft Seal Installer (6L50)
  • J 38693  Seal Installer (6L80). See Special Tools .
  • J 45000  Seal Remover. See Special Tools .