Control Valve Body Assembly Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Bolt M5 x 73 (Qty: 6) Tip: Do not remove all the bolts in the control valve body assembly. Remove only the bolts indicated. Special Tool: DT-48285 Valve Body Torx Plus Socket (if applicable). See Special Tools . |
| 2 | Control Valve Body Assembly
NOTE:
Use care when handling the control valve body assembly. If dropped, damage to the internal components of the control solenoid valve assembly, including the transmission control module (TCM), may result.
|
| 3 | Fluid Pump Seal Assembly
NOTE:
Refer to Seal Reuse Notice
.
|
| 4 | Fluid Pump Seal Assembly
NOTE:
Refer to Seal Reuse Notice
.
|
| 5 | Center Support Fluid Passage Seal Assembly
NOTE:
Refer to Seal Reuse Notice
.
|