LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1233 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> 4-5-6 Clutch Overhaul (6L90) >> 4-5-6 Clutch Plates Installation

4-5-6 Clutch Plates Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of 4-5-6 Clutch Plate Assembly & Components
GM1822778Courtesy of GENERAL MOTORS CORP.
4-5-6 Clutch Plates Installation

Callout Component Name
1 4-5-6 Clutch (Waved) Plate
2 4-5-6 Clutch Plate (Qty: 7)
3 4-5-6 Clutch Plate Assembly (Qty: 7)
4 4-5-6 Clutch Backing Plate
5 4-5-6 Clutch Backing Plate Retaining Ring
Tip:  After the retaining ring is installed, determine clutch piston travel in order to verify if the correct selective retaining ring is being used. Refer to 4-5-6 Clutch Backing Plate Retaining Ring Measurement .