4-5-6 Clutch Dampener Overhaul
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | 4-5-6 Clutch Dampener Retaining Ring
NOTE:
Ensure the retaining ring is fully seated when installed. Using a screwdriver, fully seat the retaining ring into the groove by pushing on the inside diameter around the whole circumference. If the retaining ring is not fully seated, transmission damage will result.
|
| 2 | 4-5-6 Clutch Dampener Apply Plate |
| 3 | 4-5-6 Clutch Dampener Tip: Dry and inspect the clutch dampener for the following conditions:
|