2-6 Clutch Piston Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing 2-6 Clutch Piston

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	2-6 Clutch Spring Retaining Ring Tip: Ensure the DT 47761 is centered over the clutch spring. See Special Tools . Special Tool: DT 47761 Clutch Spring Compressor. See Special Tools .
2	2-6 Clutch Spring NOTE: Ensure the spring tabs are facing down during installation and that the tabs fit between the teeth on the piston. Failure to do so may cause damage to the clutch assembly.
3	2-6 Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston.