LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1233 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information and Procedures >> No First, Second, Sixth, or Reverse Gear

No First, Second, Sixth, or Reverse Gear

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
Center (with 2-6 Low and Reverse Clutch) Support Assembly (67)
  • Inspect for a damaged center support assembly (459).
  • Inspect for worn or damaged output carrier outer sun gear shaft front and rear bushing (458 and 460).
Center Support Retaining Ring (66) Inspect for damage.
Output Carrier Assembly (68) Inspect for a worn or damaged center support roller bearing assembly (485).
2-6 and 3-5-R Clutch Hub Thrust Bearing Assembly (65) Inspect the bearing for wear or damage.