LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1176 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Accessory Trim Plate Replacement (Cadillac)

Instrument Panel Accessory Trim Plate Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Accessory Trim Panel & Clips
GM1702505Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the instrument panel center trim plate. Refer to Instrument Panel Center Trim Panel Replacement (Cadillac) .
  2. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Cadillac) .
1 Instrument Panel Accessory Trim Panel
Tip: 
  1. Disconnect the electrical connections.
  2. If replacing the accessory trim plate transfer all necessary components.
2 Retainer Clips (Qty: 6)