LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1175 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Front Seat Replacement - Bucket (with HP2)

Front Seat Replacement - Bucket (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Assembly & Components
GM1967646Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Disable the SIR. Refer to SIR Disabling and Enabling .
  2. Remove the front seat adjuster covers.
  3. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1 Front Seat Assembly Bolt (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  45 N.m (33 lb ft)
2 Front Seat Assembly Nut (Qty: 2)

Tighten:  45 N.m (33 lb ft)
3 Front Seat Assembly
Procedure: 
Disconnect the electrical connector.
scientia non olet · About LEMON Manuals