LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> Escalade Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 5.3L, 6.0L & 6.2L - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Cylinder Head Removal - Left Side

Cylinder Head Removal - Left Side

    Fig 1: Cylinder Head And Bolts
    GM1658150Courtesy of GENERAL MOTORS CORP.
    NOTE:

    The cylinder head bolts are of a torque-to-yield design and are NOT to be used again. Install NEW cylinder head bolts during assembly.

  1. Remove the cylinder head bolts (220, 221).
    2. CAUTION:

    After removal, place the cylinder head on 2 wood blocks in order to prevent damage to the sealing surfaces.

  2. Remove the cylinder head (218).
    3. Fig 2: Cylinder Head Gasket And Locating Pins
    GM1658153Courtesy of GENERAL MOTORS CORP.
  3. Remove the gasket (217) and locating pins (230).
  4. Discard the gasket and cylinder head bolts.
scientia non olet · About LEMON Manuals