LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> DTS 4.6 6 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Windshield Pillar Garnish Molding Replacement

Windshield Pillar Garnish Molding Replacement

Fig 1: View Of Windshield Pillar Garnish Molding
GM1865294Courtesy of GENERAL MOTORS COMPANY
Windshield Pillar Garnish Molding Replacement

Callout Component Name
1 Windshield Side Garnish Molding Cover

Procedure

  1. Disconnect the electrical connector.
  2. The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield pillar garnish molding is removed.
scientia non olet · About LEMON Manuals