Rear Compartment Lid Hinge Replacement

Fig 1: Rear Compartment Lid Hinge & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove rear compartment lid. Refer to Rear Compartment Lid Replacement . Remove Torque rods. Refer to Rear Compartment Lid Hinge Torque Rod Replacement .
1	Rear Compartment Hinge Nut (Qty: 1) CAUTION: Refer to Fastener Caution . Tighten 25 N.m (19 lb ft)
2	Rear Compartment Lid Hinge Bolts (Qty: 2) Tighten 25 N.m (19 lb ft)
3	Rear Compartment Hinge