LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2011 >> DTS 4.6 6 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rear Hood Seal Flange
    GM324722Courtesy of GENERAL MOTORS COMPANY
  1. Install the rear hood sea (1) to the flange (2).
    2. Fig 2: View Of Rear Hood Seal & Push In Retainers
    GM457415Courtesy of GENERAL MOTORS COMPANY
  2. Install the push in retainers (1) in order to secure the rear hood seal (2) to the vehicle.
  3. Close the hood.
scientia non olet · About LEMON Manuals