Instrument Cluster Replacement

Fig 1: Instrument Panel Cluster (IPC) Assembly & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement . Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement . Refer to Control Module References for replacement and setup information.
1	Instrument Panel Cluster Assembly Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly TIP: Disconnect the electrical connector.
3	Instrument Panel Cluster Assembly Screw (Qty: 2) Tighten 2 N.m (18 lb in)
4	Instrument Panel Cluster Bracket