Rear Bumper Fascia Replacement (Sedan)

Rear Bumper Fascia Replacement (Sedan)












2.Remove the rear fog lamp assembly. Refer to Rear Fog Lamp Replacement .

3.Remove the tire pressure indicator receiver. Refer to Tire Pressure Indicator Receiver Replacement .

1Rear Bumper Fascia Push Pin (Qty: 3)

2Rear Bumper Fascia Screw (Qty: 2)
Caution:Refer to Fastener Caution .
Tighten 2 N �m (18 lb in)

3Rear Bumper Fascia

Procedure

1.Disconnect the electrical connectors/harnesses as needed.

2.Transfer any parts as needed.