LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - Off Vehicle - 2 Of 3) >> Camshaft Position Actuator Housing Cleaning and Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Camshaft Position Actuator Housing Components
    GM1040927Courtesy of GENERAL MOTORS CORP.
  1. Inspect the camshaft position actuator housing for the following conditions:
    • The camshaft position actuator housing for damaged threads (1)
    • The camshaft position actuator housing sealing surface (2) for damage
    • The camshaft position sensor mounting bores (3) for damage
    2. Fig 2: Camshaft Position Actuator Magnet
    GM1254507Courtesy of GENERAL MOTORS CORP.
  2. Inspect the camshaft position actuator magnets for the following conditions:
    • The camshaft position actuator magnet wiring connector (1) for damage
    • The camshaft position actuator magnet sealing surface (2) for damage
  3. Repair or replace the camshaft position actuator housing and/or components as necessary.
scientia non olet · About LEMON Manuals