LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 4.6L (LH2) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Vent Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the evaporative emission (EVAP) canister. Refer to Evaporative Emission Canister Replacement .
  2. Clean away any debris that may be present around the EVAP canister vent valve.
  3. Fig 1: EVAP Canister Vent Valve
    GM827315Courtesy of GENERAL MOTORS CORP.
  4. Twist the EVAP canister vent valve counter-clockwise.
  5. Pull the EVAP canister vent valve from the EVAP canister.