Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0324 runs continuously when the engine speed is greater than 2,000 RPM and the engine load is greater than a calibrated amount.
- DTCs P0326 run continuously when:
- The engine speed is greater than or equal to 1,200 RPM
- The MAP is greater than 80 kPa
- DTCs P0120, P0121, P0122, or P0123 are not set
- DTCs P0325, P0330, P0327, P0328, P0332, P0333 run continuously when:
- The engine coolant temperature (ECT) is greater than 75°C (167°F)
- The engine run time is greater than 90 seconds